Let’s Make These Lovely Beaded Wire Plant Stakes
**This post may contain affiliate links at no extra cost to you.

Plan on making a batch of these and keep some for your plants to stick in the dirt to add a touch of glam…and make sure to allow for a bunch more, because they’re highly popular with container gardeners especially! Your friends are gonna want some too! Now, here’s what I did…
Wire to be Used
Now let’s talk wire for the base! My favorite type of wire to use is anodized aluminum craft wire in 12 gauge. It’s sturdy enough to create hangers and wraps around for various outdoor decorations, like hanging up small vases for propagating plants, things that aren’t too heavy.
It’s very flexible and not suited well to the base of the plant stake – unless you wrap it around a few times. It is better to make use of firm metal stakes and use the craft wire for the embellishing part of it. Anodized aluminum craft wire comes in lots of pretty colors and gauges.
All the way from very thin, like 22 gauge, to thick, like 14 gauge. The bigger the number the thinner the wire. And colors, let’s talk, gold, silver, red, pink, blue… all very pretty but due to exposure outside they will fade over time. Other than that I love it because it’s strong and can be bent into curlicues and loops, just don’t unwind it and re-bend it too much or it will become knotty.
Starting with the Stake (Base)
First off is choosing the base structure. You could have access to heavy wire stakes, Another good way to get a nice series of stakes going is making use of coat hangers. They come in handy for so many things, this is no less. Choose a metal one, and use wire cutters (pliers aren’t strong enough) Cut just below the curvature of the hanger and on the other side cut a little beyond the other curvature.
It’s important to have one end be perfectly linear as it makes it easier to thread string beads and bling onto. You can cut it as long as you need to I think 12″ is ideal. Use an emery board to sand off the shar edges where you cut.
I’m still going to use those two pieces of wire above to make plant pokes with. The “kinky” end was too difficult to straighten out enough…so I decided that end will go into the dirt. I did have to trim off the small kinks at the top to make it easier for beads to be thread through.
Choosing the Beads
Now the beads and bling! I like to have a mixture of opaque, semi opaque and translucent beads together on these projects..it looks really dope, just pick to a good color scheme, like greens and blues, etc. Use a combo of large and small beads together. And if you have any “alpha-beads” you could take this one step further and create beaded plant name tags too!
Also a few silver or brass ones in between colored ones for a vintage touch also looks very classy.
💡 🐦You can use any color combo you like, but if you use a vibrant color scheme like red, pink and orange, pollinators like hummingbirds will be spending more time around – score!
==>>Give or take, plan on using about 6-10 beads total for each stake…unless you’re using tiny ones.
It was tricky to find beads that would fit this thickness of wire (12 gauge, remember?) I ended up with only a handful that would fit…mostly tube beads (the kind you fuse and melt together) and pony beads. Nevertheless, I still ended up with a pretty “boho” style assemblage for these two stakes here.
Can’t Find Any Pretty Beads? Consider Making Some!
Let’s say you don’t have any or enough of the “right” kind of beads – Maybe none of them have openings big enough to fit a metal skewer through, or maybe they’re just plain ugly. No problem, ever thought about making your own? The easiest way to do this is out of polymer clay. If you can roll a little piece of clay into a ball and skewer it with a toothpick, you’ve got all it takes to make some cute clay beads.

With a little bit of pinching on the sides you can make round shapes, ovals, rectangles, I’ve even done triangle shapes too. My favorite brand Sculpey, (and Cernit does too now) makes a translucent style that’s semi-opaque, it looks amazing when swirled with colors.
I scrape some loose dust off pastel chalks to add color to my beads. The color gradations look natural and unique . To make it easier for bead batches I would use a bamboo skewer….it will pierce holes down the middle of them all at once. I then bake them in my toaster oven for 20 minutes and let it cool off. Super fun and easy!
Lastly, the stake topper, this will add a touch of elegance and class to your pokes, you can do this one of several ways. I used 18 gauge wire for the loop on top of this one, You could create a flower petal shape of something to your liking easily with some anodized wire and needle nose pliers.
Or another way is with drawer pull knobs, lamp finials, or fan pulls….next time you browse your local home improvement store see if you can’t find some of these that are crystal looking. Usually the opening on one end will stick and stay on the end of the stake. If not solvent glue will help it stay put.
Directions
- Start with your stakes whether you bought them or made them from coat hangers. Place a crimp bead on one end. so the beads don’t fall off as you work, try to leave about 6 inches of wire at the bottom as that part will be going into the pot dirt.
- Continue adding your beads of choice try to get a nice pattern going like I did, and then finish it off with your topper.
- If you used a fan/drawer pull knob, you may want to use a dab of e6000 to secure it. Let it sit up to dry and repeat for your other stakes.

Stick them in your container plants, they will ad a touch of glam and if you used clear bling they will catch the light outside and sparkle even more. Double dope! Every “plant parent” is going to love using these, so why not make a bunch and give as gifts? Have fun!
Here are my latest three pokes…just to give you an idea of how to arrange them, and how they look…. beautiful ❤️






